...

How to Hire Plumbers: Find, Check and Keep Licensed Service Plumbers

by | Nov 16, 2026 | Hiring Tips

Short answer

To hire a licensed service plumber, first decide which license level the job needs and check it with your state board. Then reply to every applicant the same day, do one interview and a half-day ride-along, and get a written offer out within about 5 days. A good plumber with a license usually has more than one shop calling.

At the same time, start growing your own. The U.S. Bureau of Labor Statistics expects about 42,000 openings a year for plumbers, pipefitters and steamfitters from 2025 to 2035, and most plumbers learn the trade through a 4 or 5 year apprenticeship. If you're training apprentices, losing one licensed plumber doesn't leave you scrambling.

You probably know how this goes. The phone's ringing, the board is full, and the one licensed plumber who applied last week took a job across town before you called back.

Journeyman vs master plumber: which license does the job need?

For a plumber who will run service calls on their own, look for a journeyman license. Look for a master only when you need someone to supervise, hold the shop's license, or pull permits where your state requires it. Paying master rates for journeyman work costs you more and shrinks your pool. Going the other way, and hiring below what the work requires, puts your license and your customers at risk.

The names and rules change from state to state, so use this as a rough guide and check with your own state board:

LevelWhat it usually meansHire one when
ApprenticeIn training. Works under a licensed plumber while learning on the job and in class.You have a licensed plumber who can train and supervise
JourneymanHas the required training hours and passed a state or local exam. Can do the work without direct supervision, but usually works for a licensed contractor.You need someone to run service calls alone
MasterMore years in the trade and a higher-level exam. In some states, a master license is needed to get the shop's contractor license or pull permits.You're adding a supervisor, covering a new city or county, or your license holder is retiring

The BLS says most states and some localities require plumbers to be licensed. Requirements vary, but states and localities often ask for 2 to 5 years of experience and a passed exam before a plumber can work independently. Some states and cities also require a separate license or endorsement for gas piping, so if your service plumbers work on gas water heaters or gas lines, ask your state board what they need.

How to check a plumber's license

Before the interview, look the license up yourself on your state licensing board's website. A photo of a card isn't enough. Most state boards have a free online lookup. In Texas, for example, the State Board of Plumbing Examiners has a public license search on its home page.

When you pull it up, check four things:

  • The name on the license matches the applicant.
  • The level (journeyman, master or other) matches what the job needs.
  • It's active, and it won't expire in the next few months.
  • Whether the record shows any discipline or complaints.

If you work in a city with its own plumbing license, check that one too. And if the plumber is moving in from another state, ask your board whether their license carries over. Some states accept another state's license. Some don't.

Where plumbing companies find licensed service plumbers

Most good service plumbers already have a job, so you won't reach them with a job ad alone.

  • Your own team. Ask your plumbers who they've worked with and would happily work with again. Pay a referral bonus after the new hire's first 90 days.
  • Supply houses. The folks behind the counter see every plumber in town. Ask who's good and who's been grumbling about their shop.
  • Trade schools and apprenticeship programs. They know who's about to finish and sit for a journeyman exam.
  • Job boards. Put the pay range, license level, on-call rules, truck and tools in the ad, so applicants can tell right away if the job fits.

How to hire plumbers in 5 days

To hire a plumber in 5 days, post on day 0, reply the same day, check the license on day 1, interview and ride along by day 4, and send a written offer on day 5. Speed is where a small shop can beat a big one.

DayStepThe rule
Day 0Post the jobPay range, license level, schedule, on-call, truck and tools are in the ad
Day 0 to 1Reply to every applicantSame day, by text, with the next step
Day 1Check the licenseOn the state board's lookup, before you book the interview
Day 2 to 4Interview and ride-alongOne interview, then a half day on real calls with your lead plumber
Day 5OfferIn writing, with pay, start date, truck, tools and on-call

It's the same plan we use for HVAC shops. Our guide on how to hire HVAC technicians faster walks through each day in more detail.

Want every plumbing applicant to get a text the same day, without typing each one? See how text recruiting works.

Plumber interview questions (and a half-day ride-along)

Ask every candidate the same questions so you're comparing apples to apples. These show how a plumber actually works:

  • "Walk me through a service call that went sideways. What did you do?"
  • "How do you explain a big repair price to a homeowner who wasn't expecting it?"
  • "Tell me about a job you had to come back to. What did you change after that?"
  • "What does a clean job site look like when you leave?"
  • "Why are you looking to leave your current shop?"

Then do a half-day ride-along on real calls with your lead plumber. Watch how they talk to customers, how they diagnose before they quote, and whether they leave the basement cleaner than they found it.

How to hire apprentice plumbers who stay

A lot of shops end up growing their own. The BLS says apprentices typically get about 2,000 hours of paid on-the-job training a year, plus classroom time on safety, local codes and blueprint reading. That's years of training, so hire people who'll stick with it.

Look for people who show up on time, follow a process and actually want to learn. For an apprentice, that matters more than any plumbing they've done before. A short work style assessment before the interview shows how someone is likely to work, which a resume can't.

Then give them a reason to stay:

  • Pair each apprentice with one lead plumber who wants to teach.
  • Put the pay steps in writing (more hours and passed exams mean more pay), and keep your word on them.
  • Look into a registered apprenticeship. On Apprenticeship.gov, the U.S. Department of Labor lets employers list apprenticeship jobs and get help starting a program.

How IdealTraits helps

IdealTraits is an all-in-one hiring platform with AI that helps businesses hire for fit, not just experience. For a plumbing shop, that means you post to 100+ job boards, every applicant gets a text right away, AI resume matching gives each one a fit score, and candidates take a validated personality assessment and record a one-way video interview before you book their time. So your afternoons go to ride-alongs with plumbers who are worth the time.

"Hiring in a small town has always been a challenge for us given the smaller talent pool. ... I went from having a couple of applicants a month to my pick of 10-20, which resulted in many more interviews given."

Joe Winslow, insurance agency owner

18,000+ businesses have used IdealTraits to hire. If you'd like to see it with one of your own plumbing openings, book a demo.

What to measure next month

Starting this month, keep track of a few numbers for every plumbing hire: how many hours it took to send the first reply, how many days to a written offer, and the license level of who you hired. If replies take more than a day or offers take more than a week, find the step where people are waiting and fix that one. Check again in 30 days.

Candidate Screening: How to Screen Job Candidates Before the Interview

Candidate screening in 6 steps for owners and managers who hire without an HR team: must-haves, knockout questions, resumes, a short assessment, a quick call, then the interview. With examples for car sales, caregivers, roofing and accounting firms.

Automotive Technician Test: How to Check a Mechanic’s Skills Before You Hire

An automotive technician test for repair shops and dealership service departments: check certifications, check fit before the visit, then a short written test, a hands-on bay test and a diagnostic talk-through. With sample questions, a bay scorecard and fair test rules.

Why Is Caregiver Turnover So High? 7 Ways Home Care Agencies Reduce It

Caregiver turnover in home care is about 75% a year. Why caregivers leave, how to work out your own turnover rate, and 7 ways home care agencies keep caregivers, from hiring to the first 90 days.

How to Hire a Dealership Finance Manager (F&I) Who Stays

How to hire a dealership finance manager who stays: the traits to look for, a mock menu presentation where the customer says no, the federal rules to ask about and a pay plan with chargebacks in writing.

How to Recruit Home Health Aides and CNAs Fast

How to recruit home health aides and CNAs fast: a one-week hiring plan with the compliance checks built in, the federal rule that lets registered CNAs take aide shifts, and what to screen for.

Restaurant Employee Turnover Rate: 2025 Data and How to Lower Yours

The restaurant employee turnover rate was about 66% in 2025 (BLS). A 5-year table, how to calculate your own rate, and the hiring changes that lower restaurant turnover.

How to Hire Water Mitigation Technicians (and Keep Them Between Storms)

How to hire water mitigation technicians: an honest job ad, fast screening for reliability, a ride-along on a dry-out, hiring fast after a storm, and keeping techs through slow months.

How to Hire HVAC Technicians Faster: A 5-Day Plan

How to hire HVAC technicians faster: a 5-day plan from job post to written offer, where to find service technicians, and how to hire comfort advisors who can sell.

How to Hire Pest Control Technicians Who Stay: A Guide for Owners

How to hire pest control technicians who stay: the traits to look for, where to find candidates, how to screen before the interview, what to ask, and how to staff up before busy season.